Merchandise Description
Item Description
Major Features:
1) Produced of higher high quality aluminum alloy, light-weight bodyweight and non-rusting
2) Big output torque and large radiating effectiveness
three) Sleek managing and reduced sounds, can perform prolonged time in dreadful situation
four) Good-seeking appearance, sturdy provider daily life and tiny volume
five) Appropriate for omnibearing installation
Primary Materials:
one)housing:aluminium alloy ADC12(measurement 571-090) die forged iron HT200(dimensions one hundred ten-a hundred and fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat therapy make gear surface hardness up to 56-sixty two HRC Soon after precision grinding, carburization layer’s thickness in between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-one
Mixture Choices:
Enter:with enter shaft, With square flange,With IEC regular input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic go over
Worm reducers are obtainable with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS
Comprehensive Images
Merchandise Parameters
Old Model | New Model | Ratio | Center Distance | Electricity | Enter Dia. | Output Dia. | Output Torque | Bodyweight |
RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
RV030 | RW030 | seven.5~a hundred | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
RV040 | RW040 | seven.5~a hundred | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~one hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | three.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | six.2kgs |
RV075 | RW075 | seven.5~one hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | seven.5~a hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | seven.5~100 | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | seven.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
RV150 | RW150 | seven.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | eighty four.0kgs |
Exploded Check out:
GMRV Define Dimension:
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | eighty | ninety seven | 54 | forty four | 14 | fifty five | 32 | 56 | sixty three | sixty five | 29 | fifty five | forty | fifty seven | thirty | seventy five | 44 | six.five | 21 | 5.five | M6*10(n=4) | 0° | five | sixteen.three | 27 |
040 | 100 | 121.five | 70 | sixty | eighteen(19) | sixty | forty three | 71 | 78 | seventy five | 36.5 | 70 | fifty | seventy one.5 | forty | 87 | fifty five | six.five | 26 | six.five | M6*ten(n=4) | 45° | six | 20.8(21.8) | 35 |
050 | a hundred and twenty | 144 | eighty | 70 | twenty five(24) | 70 | forty nine | 85 | ninety two | 85 | 43.5 | 80 | 60 | 84 | fifty | one hundred | sixty four | eight.five | thirty | 7 | M8*twelve(n=4) | 45° | eight | 28.3(27.3) | 40 |
063 | 144 | 174 | one hundred | 85 | twenty five(28) | eighty | 67 | 103 | 112 | ninety five | fifty three | 95 | seventy two | 102 | sixty three | one hundred ten | eighty | eight.5 | 36 | 8 | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | one hundred twenty | one hundred fifteen | 57 | 112.5 | 86 | 119 | seventy five | a hundred and forty | 93 | 11 | forty | 10 | M8*fourteen(n=8) | 45° | 8(10) | 31.3(38.3) | sixty |
090 | 206 | 238 | one hundred forty | one hundred | 35(38) | 110 | seventy four | a hundred thirty | one hundred forty | one hundred thirty | sixty seven | 129.five | 103 | 135 | 90 | one hundred sixty | 102 | thirteen | 45 | 11 | M10*sixteen(n=8) | 45° | 10 | 38.3(41.3) | 70 |
one hundred ten | 255 | 295 | one hundred seventy | one hundred fifteen | forty two | 130 | – | 144 | 155 | 165 | seventy four | 160 | 127.5 | 167.5 | a hundred and ten | 200 | 125 | 14 | fifty | 14 | M10*18(n=8) | 45° | 12 | 45.three | eighty five |
a hundred thirty | 293 | 335 | two hundred | 120 | forty five | one hundred eighty | – | one hundred fifty five | 170 | 215 | eighty one | 179 | 146.five | 187.5 | 130 | 250 | a hundred and forty | sixteen | 60 | 15 | M12*twenty(n=8) | 45° | 14 | forty eight.eight | a hundred |
one hundred fifty | 340 | four hundred | 240 | 145 | fifty | a hundred and eighty | – | 185 | two hundred | 215 | ninety six | 210 | 170 | 230 | a hundred and fifty | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | fifty three.8 | 120 |
Company Profile
About CZPT Transmission:
We are a professional reducer maker positioned in HangZhou, ZHangZhoug province.
Our major products is full variety of RV571-a hundred and fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical gear motor.
Merchandise are extensively utilised for applications such as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-making, building equipment, metallurgic mine, environmental protection engineering, and all sorts of computerized strains, and assembly strains.
With rapidly shipping and delivery, superior soon after-sales services, advanced making facility, our items sell well both at residence and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and the Center East and so on.Our intention is to create and innovate on the foundation of higher quality, and develop a good popularity for reducers.
Workshop:
Exhibitions:
We participate Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Win Eurasia
Packaging & Shipping
Packing details:Plastic Luggage+Cartons+Wood Circumstances , or on request
Set up Directions
To put in the reducer, it is essential to observe the subsequent troubles:
one)Examine the correct rotation path of output shaft prior to fitting reducer to machines.
2)Just before mounting, pls verify shaft diameter, bore diameter, crucial and keyway, to be confident their dimension are not deviation In purchase to preserve good performance, also pls stay away from assembling too restricted or also loose.
three)Reducer must be mounted to machines stably to avoid vibration.
four)Whenever attainable,shield the reducer against solar radiation and undesirable weather.
five)In the scenario of particularly prolonged period of time of storage(4-6 months), if the oil seal is not immersed in lubricant inside the unit, it is advisable to alter it since the rubber could adhere to the shaft or might even have dropped the elasticity.
six)Portray have to certainly not go above rubber elements and the holes on breather plug if any.
7)When link with hollow or CZPT shaft, pls grease the joint to stay away from lock or oxidation.
8)Check the correct lubricant amount by way of indicator if there is one.
9)Starting need to just take location progressively, without having quickly applying the highest load.
10)When employing numerous of motors to match reducer directly, supporting device is essential if motor is too weighty.
eleven)Make sure good heat dissipation by maintaining great air flow in close proximity to the motor enthusiast.
twelve)In the case of ambient temperature40ºC, pls call the technical section.
Soon after Product sales Provider
1.Routine maintenance Time and Guarantee:Inside 1 12 months after getting products.
2.Other Support: Including modeling choice guidebook, set up manual, and difficulty resolution manual, etc.
FAQ
one.Q:Can you make as per consumer drawing?
A: Of course, we supply tailored support for consumers appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
A: thirty% deposit ahead of manufacturing,harmony T/T just before shipping and delivery.
3.Q:Are you a trading business or company?
A:We are a manufacurer with superior tools and seasoned staff.
4.Q:What is your manufacturing capability?
A:8000-9000 PCS/Thirty day period
five.Q:Free of charge sample is accessible or not?
A:Indeed, we can source free of charge sample if consumer concur to pay for the courier price
six.Q:Do you have any certification?
A:Sure, we have CE certification and SGS certification report.
Speak to data:
Ms Lingel Pan
For any inquiries just come to feel totally free ton make contact with me. Several thanks for your kind consideration to our business!
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 22/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 22/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
###
What is a worm gear reducer gearbox?
The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.Hollow shaft worm gear reducer gearbox
Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear
The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.Double throat worm gear
There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear
The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.Brass worm gear
Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.
editor by CX 2023-04-18