Product Description
Helical Spiral Bevel Gear Motor Box 90 Degree High-Quality Transmission Right Angle Speed Reducer Alloy Steel Stainless Induction Straight Spiral Bevel Gearbox
Application of Bevel Gearbox
Bevel gearboxes are used in a wide variety of applications where there is a need to transmit motion and power between 2 shafts that are not parallel. Some of the most common applications for bevel gearboxes include:
- Automotive: Bevel gearboxes are used in automotive differentials to transmit power from the driveshaft to the wheels.
- Machine tools: Bevel gearboxes are used in machine tools, such as lathes and milling machines, to transmit power from the motor to the cutting tool.
- Conveyors: Bevel gearboxes are used in conveyors to move material from 1 location to another.
- Mixers: Bevel gearboxes are used in mixers to mix ingredients together.
- Wind turbines: Bevel gearboxes are used in wind turbines to transmit power from the blades to the generator.
- Robotics: Bevel gearboxes are used in robotics to move the robot’s arms and joints.
- Sewing machines: Bevel gearboxes are used in sewing machines to move the needle and bobbin.
- Cranes: Bevel gearboxes are used in cranes to allow the boom to rotate around the tower.
- Mining equipment: Bevel gearboxes are used in mining equipment, such as excavators and loaders, to allow the boom to rotate.
- Ships: Bevel gearboxes are used in ships to allow the rudder to rotate.
- Airplanes: Bevel gearboxes are used in airplanes to allow the nose to rotate.
Bevel gearboxes are a versatile type of gearbox that can be used in a wide variety of applications. They are characterized by their high efficiency, smooth operation, and low noise. Bevel gearboxes are also relatively compact and lightweight, making them a good choice for applications where space is limited.
Here are some of the advantages of using bevel gearboxes:
- High efficiency: Bevel gears are more efficient than other types of gears, such as spur gears. This is because the teeth of bevel gears mesh together more smoothly, which reduces friction and wear.
- Smooth operation: Bevel gears operate more smoothly than other types of gears. This is because the teeth of bevel gears mesh together more gradually, which reduces shock and vibration.
- Low noise: Bevel gears operate more quietly than other types of gears. This is because the teeth of bevel gears mesh together more smoothly, which reduces friction and wear.
- Compact size: Bevel gearboxes are typically smaller and lighter than other types of gearboxes. This is because bevel gears can be designed with more compact tooth profiles.
- Wide range of applications: Bevel gearboxes can be used in a wide range of applications. This is because they are available in a wide range of sizes and configurations.
Overall, bevel gearboxes are a versatile and efficient type of gearbox that can be used in a wide variety of applications. They are characterized by their high efficiency, smooth operation, low noise, compact size, and wide range of applications.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Stepless |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
What are the Noise Levels Associated with Worm Gearboxes?
The noise levels associated with worm gearboxes can vary depending on several factors, including the design, quality, operating conditions, and maintenance of the gearbox. Here are some key points to consider:
- Design and Quality: Well-designed and high-quality worm gearboxes tend to produce lower noise levels. Factors such as gear tooth profile, precision manufacturing, and proper alignment can contribute to reduced noise.
- Gear Engagement: The way the worm and worm wheel engage and mesh with each other can impact noise levels. Proper tooth contact and alignment can help minimize noise during operation.
- Lubrication: Inadequate or improper lubrication can lead to increased friction and wear, resulting in higher noise levels. Using the recommended lubricant and maintaining proper lubrication levels are important for noise reduction.
- Operating Conditions: Operating the gearbox within its specified load and speed limits can help prevent excessive noise generation. Overloading or operating at high speeds beyond the gearbox’s capabilities can lead to increased noise.
- Backlash: Excessive backlash or play between the gear teeth can lead to impact noise as the teeth engage. Proper backlash adjustment can help mitigate this issue.
- Maintenance: Regular maintenance, including gear inspection, lubrication checks, and addressing any wear or damage, can help keep noise levels in check.
It’s important to note that while worm gearboxes can produce some noise due to the nature of gear meshing, proper design, maintenance, and operation can significantly reduce noise levels. If noise is a concern for your application, consulting with gearbox manufacturers and experts can provide insights into selecting the right gearbox type and implementing measures to minimize noise.
Diagnosing and Fixing Oil Leakage in a Worm Gearbox
Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:
- Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
- Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
- Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
- Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
- Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
- Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
- Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
- Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
- Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
- Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.
If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.
What Industries Commonly Use Worm Reducers?
Worm reducers are versatile mechanical components that find applications in various industries due to their unique advantages and capabilities. Some of the industries that commonly use worm reducers include:
- Material Handling: Worm reducers are widely used in material handling equipment such as conveyors, bucket elevators, and cranes to control movement and manage heavy loads.
- Automotive: They are utilized in automotive manufacturing processes, assembly lines, and vehicle positioning systems.
- Food and Beverage: Worm reducers are used in food processing and packaging machinery where hygiene and cleanliness are crucial.
- Agriculture: Agricultural equipment like irrigation systems and tractors use worm reducers for controlling rotational motion.
- Mining and Construction: Heavy-duty applications in mining equipment, excavators, and construction machinery benefit from the torque multiplication provided by worm reducers.
- Energy: Wind turbines and solar tracking systems use worm reducers to convert low-speed, high-torque motion into rotational energy.
- Textile: Textile machinery employs worm reducers for controlling speed and tension in weaving and spinning operations.
- Packaging: Packaging equipment relies on worm reducers for precise movement and positioning of packaging materials.
- Medical: Medical devices and equipment often utilize worm reducers for their accuracy and controlled motion.
- Printing: Printing machines use worm reducers to regulate paper feed and ensure consistent printing quality.
Worm reducers’ ability to provide high torque output, compact design, and self-locking characteristics makes them suitable for applications requiring reliable and controlled motion across various industries.
editor by CX 2024-04-03
China best Nmrv F Right Angle Worm Gear Box with Input and Output Flange gearbox assembly
Product Description
NMRV F Right Angle Worm Gear Box with Input and Output Flange
With your specific requirements of Flange, Ratio, Shaft,etc, we can suggest the suitable
Wrom Gearbox for you.
We supply all kinds of Worm Gearbox with own factory for more than 15 years.
Contact us to get more details and factory price with very good quality products.
Product Specification:
| Item | Worm Gearbox |
| Type | NMRV / NRV |
| Model | NMRV/NRV 25/30/40/50/63/75/90/110/130/150/185 |
| Reduction Ratio | 5,7.5,10,15,20,25,30,40,50,60,80,100 |
| Flange | FA / FL or as per your demands |
| Matching Motor | 0.06KW~15KW |
| Material | Die-casting Aluminum Alloy |
| Color | Blue /Silver Grey /Customized |
| Flange Standard | PAM / IEC |
| Accessories | Shaft, Flange, Torque arm, etc |
| Lubricant | Synthetic Oil or Worm Gear Oil |
| Usage | Machinery of food stuff, ceramics, chemical, packing, dyeing, wood working, glass industries, etc |
| Note: 1) please choose from above specifications. 2) If above options can not meet your demands, please send us your requirements(ratio, flange, mounting, application, or a picture of your old one), we will recommond you a suitable type. |
|
Product Parameters:
More Photos:
Detailed Drawing will be confirmed with you before order!
Packaging:
Applications:
Company Profile:
Lunyee Industries Development Co., Ltd. is a leading manufacturer for factory automation (FA) products,
we focus on power transmission and motion control solutions!
Our main production are power transmission products like AC and DC(brush/brushless) gear motor, stepper motor,
high precision planetary gearbox (spur/helical gear) for stepping motor etc.
-WE FOCUS ON CUSTOMER SATISFACTION!
All CHINAMFG people are dedicated in customer satisfaction! We serve our customer by high quality, low price, fast delivery
and quick response on after sales service!
No matter the products are manufactured by CHINAMFG or our sub-contractors, a warranty for quality is available from us!
Lunyee use the latest equipment for manufacturing and test!
Exhibition:
Delivery:
Feedbacks:
Rated Products:
FAQ:
Q: Are you trading company or manufacturer?
A: We are the motor manufaturer for 15 years in China.
Q: How to order?
A: send us inquiry → receive our quotation → negotiate details → confirm the sample → CHINAMFG contract/deposit →
mass production →cargo ready → balance/delivery → further cooperation
Q: How about Sample order?
A: Sample is available for you. please contact us for details.
Q: Which shipping way is available?
A: DHL, FedEx, By Sea are available. The other shipping ways are also available, please contact us if you need ship
by the other shipping way.
Q: How long is the deliver, producing and shipping?
A: Deliver time depends on the quantity you order. usually it takes 7-25 working days.
Q: How to confirm the payment?
A: We accept payment by T/T, PayPal, the other payment ways also could be accepted, Please contact us before you
pay by the other payment ways. Also 50% deposit is available, the balance money should be paid before shipping.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Customized |
| Layout: | Right Angle |
| Gear Shape: | Worm |
| Step: | Single-Step |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Self-Locking Properties in a Worm Gearbox
Yes, worm gearboxes exhibit self-locking properties, which can be advantageous in certain applications. Self-locking refers to the ability of a mechanism to prevent the transmission of motion from the output shaft back to the input shaft when the system is at rest. Worm gearboxes inherently possess self-locking properties due to the unique design of the worm gear and worm wheel.
The self-locking behavior arises from the angle of the helix on the worm shaft. In a properly designed worm gearbox, the helix angle of the worm is such that it creates a mechanical advantage that resists reverse motion. When the gearbox is not actively driven, the friction between the worm threads and the worm wheel teeth creates a locking effect.
This self-locking feature makes worm gearboxes particularly useful in applications where holding a load in position without external power is necessary. For instance, they are commonly used in situations where there’s a need to prevent a mechanism from backdriving, such as in conveyor systems, hoists, and jacks.
However, it’s important to note that while self-locking properties can be beneficial, they also introduce some challenges. The high friction between the worm gear and worm wheel during self-locking can lead to higher wear and heat generation. Additionally, the self-locking effect can reduce the efficiency of the gearbox when it’s actively transmitting motion.
When considering the use of a worm gearbox for a specific application, it’s crucial to carefully analyze the balance between self-locking capabilities and other performance factors to ensure optimal operation.
Diagnosing and Fixing Oil Leakage in a Worm Gearbox
Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:
- Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
- Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
- Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
- Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
- Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
- Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
- Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
- Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
- Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
- Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.
If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.
What Industries Commonly Use Worm Reducers?
Worm reducers are versatile mechanical components that find applications in various industries due to their unique advantages and capabilities. Some of the industries that commonly use worm reducers include:
- Material Handling: Worm reducers are widely used in material handling equipment such as conveyors, bucket elevators, and cranes to control movement and manage heavy loads.
- Automotive: They are utilized in automotive manufacturing processes, assembly lines, and vehicle positioning systems.
- Food and Beverage: Worm reducers are used in food processing and packaging machinery where hygiene and cleanliness are crucial.
- Agriculture: Agricultural equipment like irrigation systems and tractors use worm reducers for controlling rotational motion.
- Mining and Construction: Heavy-duty applications in mining equipment, excavators, and construction machinery benefit from the torque multiplication provided by worm reducers.
- Energy: Wind turbines and solar tracking systems use worm reducers to convert low-speed, high-torque motion into rotational energy.
- Textile: Textile machinery employs worm reducers for controlling speed and tension in weaving and spinning operations.
- Packaging: Packaging equipment relies on worm reducers for precise movement and positioning of packaging materials.
- Medical: Medical devices and equipment often utilize worm reducers for their accuracy and controlled motion.
- Printing: Printing machines use worm reducers to regulate paper feed and ensure consistent printing quality.
Worm reducers’ ability to provide high torque output, compact design, and self-locking characteristics makes them suitable for applications requiring reliable and controlled motion across various industries.
editor by CX 2023-09-26
China 2020 Cheap Hot Sale High Quality small gear box ratio right angle gearbox worm gearbox design
Applicable Industries: Developing Material Retailers, Manufacturing Plant, Machinery Mend Retailers, Foodstuff & Beverage Factory, Farms, Printing Retailers, Building works , Energy & Mining, Foods & Beverage Retailers, Other
Custom-made assistance: OEM, ODM
Gearing Arrangement: Worm
Output Torque: 2.6-1760N.m
Input Velocity: 750~3500rpm
Output Velocity: fourteen-280rpm
Item identify: Blue colour worm equipment speed reducer
Model: From RV25 up to RV185
Materials: Aluminum&iron cating
Shade: K9149 (Grey )OR RAL5571(blue)
Ratio: 7.5,10,fifteen,20,30,40, SC Set of 2 Friendship Ideal Good friend Couple Bracelet Adjustable Braided String Enjoy Heart Appeal Bracelet for Few 50,60,80,one hundred
Warranty: 1 year soon after vessel day
Good quality Handle Technique: ISO9001:2008
Certification: CE, ISO9001
Port: ZheJiang or HangZhou Port,China
| Type | Worm Gear Speed Reducer/ gearbox |
| Model | WMRV 25/thirty/40/fifty/sixty three/75/90/one hundred ten/a hundred thirty/a hundred and fifty/185 |
| Ratio | 7.5,10,15,20,25,30,40,fifty,sixty,80,a hundred. |
| Color | Blue(RAL5571)/Silver grey (K9149) Or On Buyer Request |
| Substance | Aluminum alloy |
| Worm wheel: Aluminum Bronze or Zinc Bronze | |
| Worm shaft: 20CrMn Ti | |
| Output Shaft: metal-45# | |
| Packing | Carton, Customized entrance 16t 17t sprocket 530 for CZPT XS500 TX650 XS650 Honey Comb Carton, Wood Circumstance with wooden pallet |
| Bearing | C&U |
| Seal | CZPT or viton oil seal |
| Guarantee | 1 12 months |
| Enter Power | .09kw,.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on. |
| Usages | Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing, Indonesia market place jupiter mx new rantai and gigi tarik chain and sprocket kit Wooden functioning, Glass. |
| IEC Flange | IEC regular flange or on customer ask for |
| Lubricant | Synthetic oil or worm equipment oil |
Much more goods
Business Profile
Item line
Certifications
Exhibitions
Buyer Testimonials
FAQ one. How to decide on a gearbox which fulfills our necessity?You can refer to our catalogue to select the gearbox or we can help to decide on when you providethe technical details of necessary output torque, output pace and motor parameter and many others.two. What details shall we give before inserting a buy buy?a) Variety of the gearbox, ratio, input and output kind, enter flange, mounting place, and motor informationetc.b) Housing shade.c) Acquire quantity.d) Other specific requirements.three. What industries are your gearboxes currently being utilised?Our gearboxes are widely used in the places of textile, foods processing, beverage, chemical sector,escalator,computerized storage gear, metallurgy, tabacco, environmental safety, TERFU Motorcycle Chain CZPT Chain Sets Push Chain Obligation For Filth Bike logistics and etc.
Worm gear reducer gearbox
Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.
high efficiency
High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
low clearance
A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.
quieter
The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
easy to replace
An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.
editor by CX 2023-04-22
China SMR shaft moutned speed reducer small gear reduction boxes mini tractor gearbox right angle gearbox transmission gear box worm gearbox china
Guarantee: 3 many years
Applicable Industries: Constructing Materials Stores, Machinery Mend Outlets, Foodstuff & Beverage Manufacturing unit, Farms, Design operates, Power & Mining, Food & Beverage Retailers
Weight (KG): 30 KG
Custom-made help: OEM, ODM, OBM
Gearing Arrangement: Helical
Output Torque: 256-7449N.m
Input Velocity: –
Output Pace: –
Coloration: Blue / Gray / Buyer necessity
Packaging Information: Wooden circumstance per pc + several pcs in massive picket case
Port: ZheJiang /HangZhou port
Parts:1. Housing: Large-energy Gray Solid Iron Gearboxes2. Gears: Helical Involute Gears, Industrial conveyor standard chain manufacture drives quick pitch simplex 08b roller chain Carburizing, Quenching, Grinding3. Shafts: Substantial-strength Hardening Alloy Steel4. Input Configurations: Keyed Sound Shaft Input5. Output Configurations: Keyed Hollow Shaft Output6. Oil Seal: Double Lips Skeleton Seal7. Spare Areas: Torque arm, Optional BackstopModels:1 Phase(Ratio 5): B05, C05, D05, E05, F05, G05, Custom-made 12V 24V Micro DC Equipment Motor Worm Planetary Gearbox Motor H05, J052 Stage(Ratio 13/twenty): B13/20, C13/20, D13/twenty, E13/twenty, F13/20, G13/20, H13/20, J13/20Features:1. High strength of equipment box, Substantial Top quality Normal Motorcycle Chain and Sprocket Kit gears and shafts, strong and durable2. 2 metric output shaft bore diameters(Normal and Optional)3. Optional backstop to prevent backdriving. Backstop is not recommended for the gear ratio 54. Double lips skeleton oil seal brings together the functions of seal and dust-proof5. Commonly employed in belt conveyor and pulley drive systemApplications:Conveyors in Mine, Quarry, Gravel Transport, Baggage & Bulk Dealing with, Animal Feeding, and so on.Installation:1. Hanging Shaft Mounted2. Output Flange MountedLubrication:Oil-bathtub and Splash LubricationLubricating Oil: Mineral Oil and Artificial OilExtreme strain oil is not suggested, unless in scenario of with backstopCooling:Organic Cooling
| Models | Output Shaft Bore | Max. Torque* | Nominal Ratio | ||
| Standard | Optional | ||||
| SMR-B | 30mm | 40mm | 277N.m | 51320 | |
| SMR-C | 40mm | 50mm | 468N.m | ||
| SMR-D | 50mm | 55mm | 783N.m | ||
| SMR-E | 55mm | 65mm | 1194N.m | ||
| SMR-F | 65mm | 75mm | 1881N.m | ||
| SMR-G | 75mm | 85mm | 2970N.m | ||
| SMR-H | 85mm | 100mm | 4680N.m | ||
| SMR-J | 100mm | 120mm | 7449N.m | ||
A-Drive PWC single worm reducer gearbox
A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
Agknx driver
Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H
X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle
RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
AGknx Single
Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single
If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
AGknx X & H
The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.
editor by czh 2023-02-19
China Wpdks Series Right Angle Worm Gear Box gearbox worm box
Merchandise Description
> Merchandise Introduction
Wpw Worm Worm Reductor
1, WP series worm gearbox ‘s the transmission clean, vibration, shock and noise are modest, a large reduction ratio, vast versatility, with all kinds of mechanical products.
2, WPA series speed reducer are able to get a more substantial solitary-stage transmission gear ratio, compact, most versions have far better gear self-locking, braking requirements for mechanical equipment can help save brakes
3, worm thread engagement with the worm equipment tooth area friction loss increased than the gear transmission performance and as a result low, effortless to heat and higher temperatures.
4, interworking excellent worm produced according to national specifications, bearings, seals and so forth with standard elements. 5,
5, box kind simple kind (vertical or horizontal box for 2 buildings with bottom foot) and the universal type (box is rectangular, multi-faceted with fastened screw, not fitted with base foot or the other stop foot and other structural type)
6, WP series gear box input shaft coupling strategies are the simple type (one enter shaft and dual enter shaft), 2 motor with flange.
seven, WP series reducer ‘ output, situation and path of the enter shaft and the enter shaft on the following the output axis and down the enter shaft and down.
eight, WP series worm gearbox can be 2 or 3 sets consisting of multi stage gear reducer to get excellent equipment ratio.
| Type: | WP gears reduction gear |
| Design: | WPA40-250 |
| Ratio: | ten,fifteen,twenty,twenty five,thirty,40,50,60 |
| Shade: | Eco-friendly,Brown |
| Substance: | Solid iron physique |
| Worm Equipment- Cooper-10-3 # | |
| Worm-20CrMnTi with carburizing and quenching, area hardness is 56-62HRC | |
| Shaft-chromium steel-forty five# | |
| Packing: | Paper Carton,Plywood box / for every set(With foam board inside of) |
| Warranty: | one yr |
| Input Energy: | .55kw,.75kw,1.1kw,1.5kw,2.2kw,4kw,5.5kw,7.5kw |
| Usages: | In industrial device: Foods stuff,Ceramics,chemical, aswell as packing, printing, dyeing,woodworking, glass and plastics….. |
| IEC Flange: | 80B5,90B5,100B5,112B5,132B5…. |
| Lubricant: | Synthetic & Mineral |
> Catalogue
> Our Motor Benefits
1. Realistic price with excellent top quality
two.Every 1 checks cautiously
three.Distinct nameplate
four.Reliable package
5.Large effectiveness, smooth runingand reduced sound
6.Very best materials make greatest overall performance
> Producing Approach
> WORKSHOP Gear:
CERTIFICATION :
> Deal :
for 1 container, straight loading ,for considerably less, all merchandise with pallet,
FAQ
FAQ
1, Q:what is actually your MOQ for ac gearbox motor ?
A: 1pc is alright for every single kind electric gear box motor
two, Q: What about your warranty for your induction velocity reducer motor ?
A: 1 yr ,but besides gentleman-manufactured destroyed
three, Q: which payment way you can accept ?
A: TT, western union .
four, Q: how about your payment way ?
A: one hundred%payment in superior much less $5000 ,thirty% payment in advanced payment , 70% payment just before sending more than $5000.
five, Q: how about your packing of velocity reduction motor ?
A: plywood circumstance ,if dimensions is modest ,we will pack with pallet for much less 1 container
six, Q: What information should be given, if I get electric powered helical geared motor from you ?
A: rated power, ratio or output pace,variety ,voltage , mounting way , amount , if far more is far better.
|
US $50-5,000 / Piece | |
5 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Speed Changing, Speed Reduction |
| Layout: | Bevel |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Double-Step |
###
| Customization: |
Available
|
|---|
###
| Type: | WP gears reduction gear |
| Model: | WPA40-250 |
| Ratio: | 10,15,20,25,30,40,50,60 |
| Color: | Green,Brown |
| Material: | Cast iron body |
| Worm Gear- Cooper-10-3 # | |
| Worm-20CrMnTi with carburizing and quenching, surface hardness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Packing: | Paper Carton,Plywood box / per set(With foam board inside) |
| Warranty: | 1 year |
| Input Power: | 0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,4kw,5.5kw,7.5kw |
| Usages: | In industrial machine: Food stuff,Ceramics,chemical, aswell as packing, printing, dyeing,woodworking, glass and plastics….. |
| IEC Flange: | 80B5,90B5,100B5,112B5,132B5…. |
| Lubricant: | Synthetic & Mineral |
|
US $50-5,000 / Piece | |
5 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Speed Changing, Speed Reduction |
| Layout: | Bevel |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Double-Step |
###
| Customization: |
Available
|
|---|
###
| Type: | WP gears reduction gear |
| Model: | WPA40-250 |
| Ratio: | 10,15,20,25,30,40,50,60 |
| Color: | Green,Brown |
| Material: | Cast iron body |
| Worm Gear- Cooper-10-3 # | |
| Worm-20CrMnTi with carburizing and quenching, surface hardness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Packing: | Paper Carton,Plywood box / per set(With foam board inside) |
| Warranty: | 1 year |
| Input Power: | 0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,4kw,5.5kw,7.5kw |
| Usages: | In industrial machine: Food stuff,Ceramics,chemical, aswell as packing, printing, dyeing,woodworking, glass and plastics….. |
| IEC Flange: | 80B5,90B5,100B5,112B5,132B5…. |
| Lubricant: | Synthetic & Mineral |
Worm reducer gearbox – What You Need to Know
When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
Features
Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.
Functions
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applications
This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Cost
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspect
Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
Worm gear reducer gearbox oil
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by czh 2023-01-24
China K/Ka/Kaf 90 Degree Right Angle Gear Box Spiral Bevel Gearbox worm gearbox china
Solution Description
K/KA/KAF ninety degree correct angle equipment box spiral bevel gearbox
Functions:
one. Compact construction and simple assembly
2. Broad speed ranges and substantial torque
three. Low noise, good sealing performance, high performance
four. Stable and safe, lengthy lifetime, universal
5. Multi-structure, a variety of assembling techniques
Item image:
Specification:
| ANG Helical Equipment Motor | |
| Model | R17 ~ 187, F37-177, K37-187, S37-ninety seven |
| Enter energy | .06kw ~ 250kw |
| Input velocity | 750rpm ~ 3000rpm |
| Reduction ratio | 1/1.3 ~ 1/27000 |
| Input motor | AC (1 section or 3 section) / DC / BLDC motor |
| Set up kind | Foot / Solid shaft / Hollow shaft / Output flange… |
| Efficiency | 94% ~ 98 % for R F K collection |
| Materials of housing | die-cast aluminum / Solid iron / Stainless metal |
| Precision of gear | Correct grinding, course six |
| Warmth therapy | Carburizing and quenching |
| Components | Brake / Flange / Motor adapter / Torque arm … |
FAQ
Q: Can you make the gear motor with customization?
A: Sure, we can personalize for every your request, like energy, voltage, speed, shaft dimensions, flange, terminal box, IP grade, and so on.
Q: Do you supply samples?
A: Sure. Sample is accessible for tests.
Q: What is your MOQ?
A: It is 1pcs for the commencing of our company.
Q: What is actually your guide time?
A: Standard solution want 5-30days, a bit more time for customized items.
Q: Do you provide technological innovation support?
A: Indeed. Our organization have design and growth crew, we can offer technological innovation assist if you
need.
Q: How to ship to us?
A: It is accessible by air, or by sea, or by teach.
Q: How to shell out the income?
A: T/T and L/C is preferred, with various forex, which includes USD, EUR, RMB, and so on.
Q: How can I know the item is suitable for me?
A: >1ST verify drawing and specification >2nd take a look at sample >3rd start off mass manufacturing.
Q: Can I come to your organization to go to?
A: Yes, you are welcome to visit us at any time.
Q: How shall we speak to you?
A: You can send inquiry directly, and we will respond in 24 several hours.
|
US $100-2,000 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial/Parallel/Right Angle Shaft |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal/Vertical |
| Step: | Double/Three Step |
###
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| ANG Helical Gear Motor | |
| Model | R17 ~ 187, F37-177, K37-187, S37-97 |
| Input power | 0.06kw ~ 250kw |
| Input speed | 750rpm ~ 3000rpm |
| Reduction ratio | 1/1.3 ~ 1/27000 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC motor |
| Install type | Foot / Solid shaft / Hollow shaft / Output flange… |
| Efficiency | 94% ~ 98 % for R F K series |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Precision of gear | Accurate grinding, class 6 |
| Heat treatment | Carburizing and quenching |
| Accessories | Brake / Flange / Motor adapter / Torque arm … |
|
US $100-2,000 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial/Parallel/Right Angle Shaft |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal/Vertical |
| Step: | Double/Three Step |
###
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| ANG Helical Gear Motor | |
| Model | R17 ~ 187, F37-177, K37-187, S37-97 |
| Input power | 0.06kw ~ 250kw |
| Input speed | 750rpm ~ 3000rpm |
| Reduction ratio | 1/1.3 ~ 1/27000 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC motor |
| Install type | Foot / Solid shaft / Hollow shaft / Output flange… |
| Efficiency | 94% ~ 98 % for R F K series |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Precision of gear | Accurate grinding, class 6 |
| Heat treatment | Carburizing and quenching |
| Accessories | Brake / Flange / Motor adapter / Torque arm … |
What is a worm gear reducer gearbox?
The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox
Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear
The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
Double throat worm gear
There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear
The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
Brass worm gear
Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.
editor by czh 2023-01-15
in Siliguri India sales price shop near me near me shop factory supplier High Torque Sgr Right Angle Planetary Gear Box Can Replace Bonfigiloli and Brevini Model manufacturer best Cost Custom Cheap wholesaler
If you need any data or samples, remember to make contact with us and you will have our shortly reply. Our goods are applied in several fields. we are assured to offer our customers flexible and diversified solutions. Item Description
Large Torque Sgr rigEPT angle Planetary Gear Box Can Change Bonfigiloli and Brevini model
EPT information:
one. Ratio assortment: eight.1-191
two. Enter EPT: .twelve-270 KW
3. Permit torque rang: le 50000 N. M
four. Output speed: .3~205 r/min
5. Composition: Foot-mounted, flange-mounted, shaft-mounted
| Input construction | motor,IEC flange |
| Output | reliable shaft, hollow shaft with key,with shrink disk |
Characteristic:
one. Undertake optimized layout, module mix, rigEPT angle output, space reduction
2. Large energy and EPTevity EPTs
3. Can be blended with numerous motors, wiEPTratio assortment
4. Big output torque, easily startup, higher effectiveness
Manufacturing photographs:
EPT Photos :
Manufacturing facility
———————————————————————————————————————————————
FAQ:
one.Are you a factory or traEPT?
We are a skilled factory which has 20 several years historical past EPTized in EPT EPT .
2.MOQ:
Our MOQ is 1pcs. However there is one particular dealing with EPT $one hundred fifty for the one orEPTwhich significantly less than $3000.00
three. Guarantee
Our warranty is 12months
four. Payment expression
one hundred% T/T EPT and LC at sigEPT .
five. Do you settle for customization ?
Of course.SGR have robust R ampD staff, we can give customizable provider according to requirements.
six. EPT
EPTly we use stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd export plywood case to arrange the cargo .
seven. Delivery time
In regular ,time of delivery is 30daEPTafter getting the prepayment .
8. What sorts of certification do you use ?
DNV-ISO9001:2008, SGS,CE etc, And new items patent.
9. What kinds of inspection you do ahead of shipment ?
We do temperature check, noise, and oil leak inspection and commissioning ahead of cargo.
ten.How do you resolve if the production have difficulty ?
Primarily, we don’t need to have consumer send out the merchandise again to us. Since the EPT is extremely high, if there satisfies a dilemma,we first of all inquire for the pictures for ruined elements. And foundation on the photos, we can have a fundamental idea for the defect purpose. Our ensure is twelve months, if throughout the ensure, we can offer fix .
